Repair service · Ahmedabad

Charging Port Repair in Ahmedabad

Charging port repair restores a reliable electrical connection between your charger and the phone. Mr Senior inspects and ultrasonically cleans the port first, tests the cable and charger, then replaces the port flex or performs board-level microsoldering only when cleaning is not enough.

Turnaround
Cleaning in minutes; port replacement usually 2–4 hours
Warranty
Written warranty on replaced port assemblies and the fitting work
Where
Shastri Nagar, Ahmedabad
Call +91 79842 61070All services
Charging Port Repair at Mr Senior in Ahmedabad

What this repair solves

A phone that will not charge is one of the most common repair requests we see, and one of the most commonly over-repaired. In a large share of cases the port is not broken at all — compacted lint, dust and pocket fibre sit at the back of the connector and stop the cable from seating fully. Cleaning that out costs far less than a port replacement.

When cleaning is not enough, the fault is usually mechanical or electrical: bent pins, a cracked solder joint, corrosion from sweat or liquid, or a damaged charging IC on the board. Mr Senior tests the charger, cable and port separately so the diagnosis identifies the failing component instead of replacing everything.

After any port repair we test more than charging. On most phones the port flex also carries the microphone, headset detection or antenna contact, so we verify fast charging, data transfer, call audio and network behaviour before handover. A port that charges but kills your microphone is not a finished repair.

Signs you need this repair

  • Cable must be held at an angle or propped up to charge
  • Phone charges only with one specific cable or charger
  • Accessory not supported or slow charging warnings
  • Charging starts and stops repeatedly with movement
  • Port feels loose, crunchy or visibly bent
  • Wireless charging works but wired charging does not

What is included

  • Port inspection under magnification
  • Ultrasonic or precision cleaning of lint and corrosion
  • Charger and cable testing before any part is replaced
  • Port flex or sub-board replacement where required
  • Microsoldering for damaged charging ICs and pads
  • Fast charge, data transfer and microphone testing

How the repair works

  1. 01

    Test the whole charging path

    We check the adapter, cable, port and charging current so the fault is attributed to the right component.

  2. 02

    Clean before replacing

    Compacted lint and oxidation are removed under magnification, and the port is retested with your own charger.

  3. 03

    Repair or replace

    If the port is damaged we replace the flex or sub-board; if the pads or charging IC are damaged we quote board-level work.

  4. 04

    Verify everything the port carries

    We confirm fast charging wattage, data transfer, microphone input and signal behaviour after reassembly.

Parts we fit

  • Original service-pack port

    Factory-grade charging assembly with matching pin layout and daughterboard components.

  • Premium compatible flex

    Tested replacement flex for models where original stock is scarce, checked for fast-charge support.

  • Board-level repair

    Replacing the charging IC, reflowing pads or rebuilding torn traces when the port itself is fine but the circuit is not.

What affects the price

Cleaning versus replacement
A cleaning job costs a fraction of a port replacement, which is why we always inspect first.
Port design
Sub-board ports are quicker to replace than ports soldered directly to the main board.
Water or sweat corrosion
Corroded pads and traces may need microsoldering in addition to the port part.
Charging IC damage
A failed charging IC needs chip-level work and is quoted only after electrical testing.

Prices are confirmed after diagnosis for your exact model. Call +91 79842 61070 for an indicative range before you visit.

Models and brands we service

  • Samsung
  • Redmi
  • Realme
  • Vivo
  • Oppo
  • OnePlus
  • Apple iPhone
  • Motorola
  • iQOO

Charging Port Repair FAQs

Last reviewed 2026-10-29

  • Why does my phone only charge when I hold the cable a certain way?

    That symptom usually means the port has worn contacts, a cracked solder joint or compacted lint stopping the plug from seating. Mr Senior inspects the port under magnification and cleans it first; if the contacts are worn, the port assembly is replaced.

  • Can a charging port be repaired without replacing it?

    Often yes. Lint removal, contact cleaning and minor solder repairs restore many ports. Replacement is only recommended when pins are bent, the housing is cracked or the flex is torn.

  • My phone charges slowly even with a fast charger. Is the port at fault?

    Not always. The charger, cable, charging IC and battery temperature can all limit wattage. We measure actual charging current with your accessories and compare it with the phone's rated input before blaming the port.

  • Will the microphone still work after a port replacement?

    On many phones the lower microphone sits on the same flex as the port, so a low-quality part can degrade call audio. We test microphone input after fitting and only use assemblies that carry the correct components.

  • Can you fix a port damaged by water or sweat?

    Yes, but corrosion often spreads to nearby pads and traces. We clean and inspect the area, then quote microsoldering if the corrosion has eaten into the board. Repairs are more successful when the phone is brought in quickly.

  • How much does charging port repair cost in Ahmedabad?

    Cleaning is the cheapest option and is done at the counter. Port replacement depends on whether the port is on a sub-board or soldered to the main board, and board-level repair is quoted after testing. Call +91 79842 61070 with your model for an indicative range.

Where to get this repair in Ahmedabad

The bench is at Shastri Nagar, Ahmedabad. Customers travel from across the city — these are the areas we link to most often.

Related repairs

These services are often diagnosed alongside this one.

Other repair services

Book charging port repair in Ahmedabad

Free diagnosis at Shastri Nagar, Ahmedabad. Call ahead to confirm the part for your exact model and reserve a bench slot.

Call +91 79842 61070Browse services